The EPS block machine applies PLC and touch screen with advanced molding technique can produce various shapes of EPS products, the vacuum and hydraulic system can increase molding speed and reduce cooling time.
Product Description
EPS block moulding machine, also known as automatic EPS foam ICF block moulding machine, it is a horizontal EPS block forming machine, can be used for insulation concrete form. Using this EPS molding machine, EPS blocks of different sizes can be obtained efficiently and easily.
Item |
Unit\Type |
PSJ-460 |
PSJ-800 |
PSJ-1100 |
PSJ-1400 |
Dimension |
mm |
460 |
800 |
1100 |
1400 |
Inner Diameter Height |
mm |
700 |
1200 |
1800 |
2400 |
Cubage of preexpander |
m3 |
0.1 |
0.6 |
1.9 |
3.6 |
Foaming density |
Kg/m3 |
12~60 |
12~60 |
12~60 |
12~60 |
Production efficiency |
Kg/h |
60~100 |
80~130 |
260~500 |
300~600 |
Steam pressure |
Mpa |
0.4~0.8 |
0.4~0.8 |
0.4~0.8 |
0.4~0.8 |
Pressure of compressed air |
Mpa |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
Inlet of steam |
mm |
25 |
32 |
40 |
40 |
Inlet of compressed air |
mm |
32 |
32 |
32 |
32 |
Sewage outlet |
mm |
50 |
50 |
80 |
80 |
Air Outlet |
mm |
80 |
80 |
100 |
100 |
Overall Dimension |
mm |
2100×700×2400 |
1800×1300×3000 |
1900×2200×4600 |
2200×2600×4800 |
The EPS block machine applies PLC and touch screen with advanced molding technique can produce various shapes of EPS products, the vacuum and hydraulic system can increase molding speed and reduce cooling time.
1. This EPS foam block moulding machine adopts PLC programmable controller and touch human-machine interface control, automatic feeding, automatic control feeding process, has formed a complete guarantee automatic cycle of production equipment.excellent quality EPS automatic cement block moulding machine
2. This EPS machine use high quality square tube and welded steel and other groups, each template through heat treatment and after assembly of small deformation, strength and durability.excellent quality eps automatic cement block moulding machine
3. This EPS block molding machine uses a unique heat penetration of advanced foreign EPS moulding process, penetrating ability, good adhesion, good product quality, significant energy saving features.
4. Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation;
5. Equipped with material level sensor for control the filling, the block cooling is controlled by foam pressure sensor, EPS block machine realizes the filling, heating, cooling and open block mould, the whole working procedure automatically.
If you are looking for low cost EPS foam machine for sale, welcome to choose Tepai. Due to our high quality products and superior customer service, we have a global customer base including Russia, Korea, Serbia, Romania, Egypt, Mexico, Pakistan, India, Poland, USA, Turkey, Kenya Brazil, Mexico. Please feel free to contact us for more information!
Automatic EPS Foam ICF block Moulding Machine
Application Products: Automatic EPS Foam ICF block Moulding Machine for Insulation Concrete Form
EPS machine refers to the manufacture of polystyrene foam. The full set of EPS machine equipment includes pre-set machine, sheet and automatic moulding machine, cutting machine, recycling granulator and auxiliary equipment. It is widely used for electric foam packaging, fruit and vegetable foam box, aquatic products foam room and various packaging products.
The method of EPS machine is to put the raw material into the steam or electric heating foamed material, and then the foamed material is conveyed to the plastic moulding machine to form the products. Finally, the products are cut or dried and the EPS machine products are sent to the cutting machine or drying system.
When using a machine with good grounding protection, you should check whether the screws are loose, whether the spindle rotation is flexible, and whether the motor and wiring are installed correctly.
EPS raw materials are prepared by foaming, drying and curing. The foamed and stabilised material is fed into the mould. Then the steam is heated and melted to form. After cooling and shaping, the foam product is moulded and the production process is completed.
Building
Sandwich panel, 3D panel, Brick insert, etc.
Insulated Concrete Foam (ICF).
Packaging
Vegetable and fruit box, fish box, electronics packaging
Plastic Foam Flotation
Float
Filter Material
Applicable in medium and small scaled water supply system
Decorating
Cornices, Ceiling tiles, Articles in arts and decoration
Protecting
Anti-freeze pad to cushion foundations of roads and railways in high cold region
Other Applications
Applicable in seeding nurseries for hydroponics; Mixed with clay and cement to manufacture lightweight wall titles and cement castings; As filling material for pillow As filling material for pillow
EPS / EPP Foam Packaging Shape Moulding Machine
EPS (expanded polystyrene) and EPP (expanded polypropylene) are types of foam materials that are often used in shape molding machines. These machines are designed to heat and mold the foam material into various shapes and sizes.
Automatic EPS Foam Block Cutting Machine
These blocks are cured, then cut and shaped to produce a variety of eps products, bringing lots of benefits to the construction and packing industries.
Tags