This Automatic Blow Molding Machine mainly to use make PETG Materials 10ML-8L capacity cosmetic bottles and sport water kettles (middle size bottles or container)
Attribute
Container Capacity:
Output (dry cycle):
Station Machine:
Head:
Product Description
Name |
Units |
YD75Ⅰ |
YD75Ⅱ |
Max product volume |
L |
8 |
8 |
Dry cycle |
PC/H |
800 |
750*2 |
Screw diameter |
MM |
75 |
75 |
Screw L/D ratio |
L/D |
24 |
24 |
Screw drive power |
KW |
22 |
22 |
Screw heating capacity |
KW |
7-8 |
7-8 |
No. of heating zone |
ZONE |
4 |
4 |
Outpul of HDPE |
KG/H |
100 |
100 |
oil pump drive power |
KW |
7.5 |
7.5 |
Camping force |
KN |
80 |
80 |
Max.size of mold |
MM |
400*430 |
400*430 |
Template size |
MM |
380*420 |
380*420 |
Mold stroke |
MM |
170-520 |
170-520 |
Max,die diameter |
MM |
170 |
170 |
Bolwing pressure |
MPa |
0.6 |
0.6 |
Air volume |
M³/MIN |
0.8 |
0.8 |
Cooling water pressure |
MPa |
0.3 |
0.3 |
Water consumption |
L/MIN |
60 |
80 |
Size of machine |
L*W*H |
4.2*2.0*2.7 |
4.2*2.0*2.7 |
Weight of machine |
Ton |
6.8 |
7.5 |
PETG material sport water bottles Automatic Extrusion Blow Molding Machine.
Application:
This Automatic Blow Molding Machine mainly to use make PETG Materials 10ML-8L capacity cosmetic bottles and sport water kettles
Automatic Single/Double Station Blow Molding Machine special for plastic PETG bottles Feature as below:
1. Linear guider strip style
2. With single station or double station
3. Adopt 1-4 die mold heads
4. Multi-layers :1-3 Co-Extrusion Layers
5. Multi cavities: 1-4 cavities
6. Production Volume: 10ml-8L
7. Application Products: PETG Cosmetic bottles or Sport water bottles
8. Optional Parison controller/Auto Deflasher/Auto material feeding /Auto Recycling/IML(In Mold Labeling)/Leakage detector/Filling/Packing onlined full automatic production.
9. Energy Saving
Energy savings at least 40% greater than conventional fixed displacement pump systems (The energy-saving effect varies depending on the operation conditions. )
10. High Accuracy with Simple Operation
High-Accuracy servo control according to analog pressure (P) / flow rate (Q) voltage commands
11. Longer life for hydraulic units & O sealings
MOOG Servo motor due to its instant reaction speed, it does not require always running like traditional induction motor, so the hydraulic oil temperature is lower, which protect the hydraulic units and O-rings to use more longer life.
12. Faster Shipping Adjustment
Simple adjustment to start a trial run on the machine, meaning a shorter adjustment time
13. Improving the Working Environment
Reduced noise during operation
14. Exceeds Standard of High Efficiency Motor regulation
Incorporating a motor dedicated to servo-based rotational speed control
Since no induction motor is used, the maximum discharge rate of the pump does not fluctuate depending on the power supply frequency, making it unnecessary to adjust the machines' maximum speed for each shipping destination.
PETG cosmetic Bottle Automatic Blow Molding Machine Advantages
1. Hydraulic system and valves connections from Japanese Yuken industry.
2. Computer control system (PLC) Japanese Mitisubishi PLC
Used to control all electrical components and touch screen
3. Auto-deflashing Unit
Remove extra parts of products automatically and saving your labor cost
4. Electrical Cabinet
All electric components from famous world brand to ensure the quality and stability
5. Touch screen
Chinese and English(or other language)
All movement operated by touch screen,Make the process full-automatic
6. Advanced technical process
All the oil pipes are seamless piple connecting , only our factory use this method , and the oil circulation system design by ourselves, machine run faster , smoother and quieter than other manufacturers.
7. Oil cooling technical
Our first-class advanced oil cooling technology , also use different material according to our rich experience , make machine speed quickly and long life.
Atomated Single/Double Station Blow Molding Machine Special For Plastic PETG cosmetic bottle or sport water bottle
Application: Dual Station Blow Molding Machine Special For Plastic PETG Bottles
Extrusion moulding machines are used to form plastic or metal materials into predetermined shapes. In this process, the material is melted and passed through the extruder to form long tubes or rods. It is cooled and cut into desired lengths. Typically, extruded plastic products manufactured in this manner are used for wiring or insulation applications.
The cross-section of this product exhibits uniformity throughout the length of the tubing, which is valuable for many projects. Extruded plastics can also be made into other tubular products, such as straws. Plastics can also be moulded into sheets or films by flattening them with a set of cooling rolls.
Extrusion moulding applications
A large number of extrusion moulding products are produced in different industries and sectors. For example, the process is ideally suited for the manufacture of hollow pipes and tubes. These include PVC water and sewage pipes, which can be several feet in diameter. On the other hand, the medical industry requires very, very small tubing for a variety of diagnostic and surgical applications. Extrusion moulding can provide both of these diameter ranges without compromising performance. Other plastic extrusion moulding applications include straws and fuel lines in automotive engines. Another key application is wiring insulation for wires and cables.
Extrusion moulding processes can also produce very thin plastic sheets and films. They are versatile and can be used in many different areas. Some examples include window glazing and machine guards, glass replacement materials and packaging such as beverage bottles or pharmaceutical blister packs. Finally, the process is well suited to the manufacture of long cross-section shapes such as windscreen wiper blades or vinyl signs and wall panels.
Plastic Extrusion Process
The plastics extrusion process is typically used for projects that require high-volume, continuous manufacturing. Plastic polymer pellets are first fed from a hopper into the main barrel of the extruder. Here, the pellets or granules are gradually melted as the plastic passes through a heater and is pushed by a rotating screw. Heat is generated by the heating profile of the barrel and the increased friction and pressure within it
The molten plastic is then purified through a strainer before the liquid is forced through the mould. It is carefully sized and shaped to create the desired finished product. The newly formed pipe forms a solid shape that exactly matches the shape of the mould. The extrudate is then passed through a water bath and cooled under some powerful fans. As plastic is an excellent insulator, it can take a long time to cool and solidify into the final product. Once this is achieved, the finished product is extracted from the machine.
Related news: What is the difference between injection moulding and extrusion moulding processes?
TEPAI machine has the function of extrusion blowing machine for your produce PE,PP, ABS material products. The machine can be used for your manufacture of various bottles, containers and shapes, so that can be used for your Our machine has the function of extrusion blowing machine for your produce PE,PP, ABS material products. can be used for your production of chemical barrel, toolbox, cosmetic bottle, detergent bottle, engine oil and lubrication container, and also drink bottle, amusement devices and transport facilities.
As a reliable partner, we want to assist you in the further successful development of your business through our services. Our international experts will provide direct assistance quickly. Get a quote now!
Tags