The High Speed Full Automatic Blow Molding Machine mainly to use make 10ML-5L Milk or Yogurt Bottles
Attribute
Container Capacity:
Station Machine:
Product Description
KSY95-12L Blow Molding Machine Main Parameter
Screw Diameter |
¢90mm / ¢95mm |
Max.Plasticizing capacity |
125Kg/h(¢90mm ) 140Kg/h(¢95mm ) |
Clamping force |
190KN |
Distance between plates |
200-580mm |
Mould stroke |
720mm |
Dry cycle time |
7.5(S) |
Mould Dimenstion |
Max.Width: 700mm Max.Height: 500mm Min.Thickness: 210mm |
Product weight/volume |
Weight: 30-800g Capacity: 150ml-12L |
Mould center distance |
Double Head: 320mm Three Head: 200mm Four Head: 150mm Six Head: 100mm/110mm Eight Head: 80mm |
Drive Motor power |
Servo Oil pump drive power: 22kw Extrusion drive power: 45kw/(¢90mm), 55kw/(¢95mm) |
Average Power consumption |
70kw / h(¢90mm) 80kw / h(¢95mm) |
Air Pressure/Air consumption |
6-8KG / CM2 2.5M3 / Min |
Cooling water consumption |
200L/Min |
Voltage supply |
220V / 380V / 415-440V / 50HZ / 60HZ / 3P |
Machine Dimension |
L*W*H: 4600mm*3500mm*2650mm |
Machine Weight |
16Tons |
High Speed Milk Yogurt Bottle Full Automatic Blow Molding Machine
Appllication:
The High Speed Full Automatic Blow Molding Machine mainly to use make 10ML-5L Milk or Yogurt Bottles
Automatic Single/Double Station Blow Molding Machine special for plastic Milk or Yogurt Bottles and Feature as below:
1. Linear guider strip style, high speed
2. With single station or double station
3. Adopt 1-12 die mold heads
4. Multi-layers :Single Extrusion Layer
5. Multi cavities: 1-12 cavities
6. Production Volume: 10ml-5L
7. Application Products: Milk or Yogurt Bottles
8. Optional Parison controller / Auto Deflasher / Auto material feeding / Auto Recycling / IML(In Mold Labeling) / Leakage detector / Filling / Packing onlined full automatic production.
9. Ensuring single layer of resin completely melt, blow molding machine using the latest international composite super imposed multilayer flow design. make the flow smooth and has no dead angle, the material and color piece can be changed, the material base of good quality.
10. The extrusion system of single layer extrusion blow moulding machine consists of 1 set of extrusion and composition, machine parts and screws adopt high quality nitride alloy steel, have high surface hardness, long service life and good quality of plasticzing, which is suitable for processing high molecualr weight polyethlene. The pressure sets on the extrusion system can make sure the stability of material base of the continuous co-extruding die.
11. Introducing advanced technology from Germany, Italy, Japan etc.
12. Involving advanced design and production of super large-scale blow-molding machine and engineering management capability.
13. Holding over 40 items Patent Technologies.
Automatic Blow Molding Machine for Milk and Yogurt Bottles Advantages
DIE HEAD
Head mode: the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation.
EXTRUSION SYSTEM
Gradient mixing type with high-speed energy saving design, gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥800, brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥900, brittleness≤2.
HYDRAULIC SYSTEM
The main hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on.
ELECTRICAL CONTROL
The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.
MECHANICAL STRUCTURE
Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers.
AIR & WATER SUPPLY
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.6~0.8 Mpa, air consumption is1.0~1.2 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 6000L/hour.
Atomated Single/Double Station Blow Molding Machine Special For Plastic HDPE/PP Milk and Yogurt Bottles
Application: Dual Station Blow Molding Machine Special For Plastic HDPE/PP Milk and Yogurt Bottles
Tags