The eps wall panel machine has all advantages and features which is same to DZ/DF block molding machine;
Product Description
EPS polystyrene mold
.SPB200-800DZT/DFT
|
Item |
|
SPB200DZ |
SPB300DZ |
SPB400DZ |
SPB600DZ |
SPB800DZ |
|
Mould Cavity Size |
|
2040*1240*1030(mm) |
3060*1240*1030(mm) |
4080*1240*1030(mm) |
6100*1240*1030(mm) |
8120*1240*1030(mm) |
|
Block Size |
|
2000*1200*1000(mm) |
3000*1200*1000(mm) |
4000*1200*1000(mm) |
6000*1200*1000(mm) |
8000*1200*1000(mm) |
|
Steam |
Entry Consumption Pressure |
DN65 30~50kg/cycle 0.8Mpa |
DN65 50~70kg/cycle 0.8Mpa |
DN100 60~90kg/cycle 0.8Mpa |
DN100 100~130kg/cycle 0.8Mpa |
DN150 120~170kg/cycle 0.8Mpa |
|
Compressed Air |
Entry Consumption Pressure |
DN40 1.5~2m3/cycle 0.6Mpa |
DN40 1.8~2.2m3/cycle 0.6Mpa |
DN40 2~2.5m3/cycle 0.6Mpa |
DN40 2~3m3/cycle 0.6Mpa |
DN40 2.5~3m3/cycle 0.6Mpa |
|
Cooling Water |
Entry Consumption Pressure |
DN50 0.4m3/cycle 0.4~0.6Mpa |
DN50 0.6m3/cycle 0.4~0.6Mpa |
DN50 0.6m3/cycle 0.4~0.6Mpa |
DN50 0.6-1m3/cycle 0.4~0.6Mpa |
DN50 0.8-1.2m3/cycle 0.4~0.6Mpa |
|
Drainage |
Vacuum drain Steam vent Condensate |
DN125 DN100 DN100 |
DN125 |
DN125 |
DN125 |
DN125 |
|
Throughput |
15kg/m3 |
5min/cycle |
6min/cycle |
7min/cycle |
8min/cycle |
8min/cycle |
|
Connected Load |
|
20.5~24.5KW |
20.5~24.5KW |
24.5~35.5KW |
24.5~35.5KW |
35.5/`43.5KW |
|
Overall Dimension |
|
5700*4000*2850(mm) |
7500*4500*3000(mm) |
11000*4500*3300(mm) |
12600*3960*2906(mm) |
15700*4600*34050(mm) |
|
Weight |
|
6000kg |
7200kg |
12000kg |
15000kg |
18500kg |
|
Room Height Required |
|
6000mm |
6000mm |
6000mm |
6000mm |
6000mm |
|
Note:We can make polystyrene automatic vacuum block molding machine according to customer's requirement. |
||||||
Main features of eps polystyrene mold
The eps wall panel machine has all advantages and features which is same to DZ/DF block molding machine;
1. Machine structure:
a, The machine mould are welded by strong rectangle tube and steel plate with high strength frame, keep more safety;
b, All block mould frame are processed by heat-treatment, the welding pressure will be released, so the frame would not deform easier, accurate machining process keep non-leakage;
c, After heating treatment, all mould frame are processed by sand blasting treatment to get rust prevention, so under coat and finishing coat are greatly improved anticorrosion performance and long life;
d, Adopts three Germany gauges and safety valve for double protection, the machine will be water pressure and steam many testing, ensure the machine more stable and safety.
2. Steam system: Adopts three ball valves to take place of one big steam valve (save steam 20%) with ISO-standard butterfly valves, greatly improved stably and long life;
3. Control system:
a, Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation;
b, Equipped with material level sensor for control the filling, the block cooling is controlled by foam pressure sensor, it is realize the filling, heating, cooling and open block mould, the whole working procedure automatically.
4. Vertical frame type: less floor occupied, with good drainage performance, reduced low moisture content of blocks advantage etc.
Tags
