The machine special for Automobile vehicle car plastic bumper making
Automatic wholesale Automatic Plastic Chair Car bumper, Injection Molding Machine Feature
Product Description
|
SPECIFICATION |
HJF3000 |
||||
|
Screw Type |
A |
B |
C |
D |
|
|
Screw Diameter |
Mm |
180 |
210 |
220 |
|
|
Screw L/D Ration |
L/D |
24 |
24 |
22.9 |
|
|
Shot Size(Theoretical) |
cm3 |
29390 |
40003 |
43904 |
|
|
Injection Weight(PS) |
g |
26745 |
36402 |
39953 |
|
|
Injection Rate |
g/s |
1468 |
2000 |
2200 |
|
|
Injection Pressure |
MPa |
210 |
155 |
141 |
|
|
Screw Speed |
rpm |
0~50 |
|||
|
Clamping Force |
KN |
30000 |
|||
|
Opening stroke |
Mm |
2000 |
|||
|
Space Between Tie Bars |
mm |
1900*1750 |
|||
|
Max.Mold Height |
mm |
1900 |
|||
|
Min.Mold Height |
mm |
1000 |
|||
|
Ejector Stroke |
mm |
450 |
|||
|
Ejector Tonnage |
KN |
565 |
|||
|
Max.Pump Pressure |
MPa |
16 |
|||
|
Pump Motor Power |
KW |
55+55+55+55 |
|||
|
Heater power |
KW |
177 |
|||
|
Machine Dimension(L*W*H) |
M |
22*5.5*5.00 |
|||
|
Machine weight |
T |
220
|
|||
|
oil Tank Capacity |
L |
450 |
|||
Plastic Auto Car Part Bumper Injection Molding Machine
Application
The machine special for Automobile vehicle car plastic bumper making
Automatic wholesale Automatic Plastic Chair Car bumper, Injection Molding Machine Feature
CONTROL SYSTEM
All-digital control system uses dedicated controller, multiple CPU processing division,
a multi-functional automatic fault detection, alarm system, certificates 99 mold of
processing procedures, with remote control interface. System is of high stability and
responsiveness. System uses color LCD, man made interface for easy operation and
with a number of peripheral interfaces.
HYDRAULIC SYSTEM
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable. The noise is less than 75 dB. The medium and large machine adopts a two-way cartridge inserted valve system to improve the system of flow and speed of response, and makes the whole machine reach the best performance.
SERVO SYSTEM
After receiving the pressure and flow instruction from computer controller, the servo driver will compare it with the actual pressure and flow feedback, and rectify the difference the rotating speed of the servo motor. in this way , the control of injection moulding is not only acurate but also fast, and the repeatability of the products high as well.
Automobile vehicle car plastic bumper injection molding machine advantage
The machine use the high-performance servo dynamic control system,the oil pump as the power source,having the characteristics as follow:high response,saving energy, low noise, high-control precision, and have the breakthrough in the prefect connection of the electrical servo and hydraulic drive system.
Clamping system: Faster response, steable and high rigidity.
Injection system: Accurate and flexible, lower rejection rate.
Control system: omputer and simple operation,molding data memory system.
Power system: Energy saving, high efficient and precise.
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Ceramic heating loop: Uniform heating, better thermal insulation properties so good for production.
Visiable lubrication system: on time clean, avoid cast steel parts abrasion and broken.
Oil treasure: Filter of hydraulic oil, good for pump and valves.
Long working life: Imported spare parts and updated version.
High speed Automatic Injection Molding Machine for Plastic Auto Car Part Bumper
Application: Injection Molding Machine for Plastic Auto Car Part Bumper
Tags
