SIV series fully automatic pp infusion bottle Blowing Machine is a high performance linear line type bottle blowing machine which is newly developed according to IV solution industry requirement.
Product Description
PP Bottle |
Item |
Unit |
LS-SFDT2 |
LS-SFDT4 |
LS-SFDT6 |
LS-SFDT8 |
LS-SFDT 10 |
LS-SFDT 12 |
LS-SFDT 15 |
LS-SFDT16 |
|||||||
MOLDING |
Clamping force |
kg |
20000 |
40000 |
45000 |
52000 |
55000 |
65000 |
65000 |
65000 |
|||||||
Clamping stroke |
mm |
70*2 |
70*2 |
70*2 |
70*2 |
70*2 |
70*2 |
70*2 |
70*2 |
||||||||
Strech rod stroke |
mm |
250 |
250 |
250 |
300 |
240 |
240 |
220 |
220 |
||||||||
Base mold stroke |
mm |
40-100 |
40-100 |
150 |
90-200 |
150 |
150 |
125 |
125 |
||||||||
Cavity Pitch |
mm |
95.25 |
95.25 |
95.25 |
95.25 |
95.25 |
95.25 |
76.2 |
76.2 |
||||||||
Number of cavity |
cavity |
2 |
6 |
6 |
8 |
10 |
12 |
15 |
15 |
||||||||
Spindle chain pitch |
mm |
50.8 |
50.8 |
50.8 |
50.8 |
50.8 |
50.8 |
50.8 |
50.8 |
||||||||
CONTAINER |
Capacity |
cc |
100-1000 |
100-1000 |
100-1000 |
100-700 |
100-500 |
100-500 |
100-500 |
100-250 |
|||||||
Neck inner diameter |
mm |
18-25 |
18-25 |
20-28 |
18-25 |
18-22 |
18-22 |
18-22 |
18-22 |
||||||||
Neck height |
mm |
10-25 |
10-25 |
18-25 |
10-25 |
10-25 |
10-25 |
10-25 |
10-25 |
||||||||
Support-ring diameter |
mm |
32 |
32 |
42 |
32 |
28-32 |
28-32 |
28-32 |
28-32 |
||||||||
Perform height |
mm |
120 |
100 |
130 |
150 |
100 |
100 |
90 |
90 |
||||||||
Max.diameter |
mm |
88 |
88 |
88 |
85 |
86 |
86 |
70 |
70 |
||||||||
Max.height |
mm |
280 |
280 |
240 |
280 |
225 |
225 |
200 |
200 |
||||||||
OUTPUT |
B.P.H |
800-3200 |
|
|
11000-19200 |
14000-24000 |
|
||||||||||
ELECTRICAL SYSTEM
|
Number of oven |
pcs |
6 |
8 |
10 |
11 |
13 |
16 |
20 |
20 |
|||||||
Number of lamp |
pcs |
42 |
54 |
70 |
99 |
91 |
126 |
120 |
120 |
||||||||
Total installed power |
kw |
95 |
128 |
150 |
242 |
222 |
302 |
295 |
295 |
||||||||
Max.heating power |
kw |
63 |
108 |
140 |
198 |
182 |
252 |
240 |
240 |
||||||||
Power supply |
一 |
360-400V 50/60HZ |
|||||||||||||||
Power consumption |
kw.h |
55 |
78 |
90(0.5L) |
112 |
166 |
225 |
220 |
235 |
||||||||
AIR SYSTEM |
Operating pressure |
kg/cm2 |
9 |
9 |
9 |
9 |
9 |
9 |
9 |
9 |
|||||||
Low pressure consumption |
L/min |
2500 |
2500 |
3500 |
4000 |
3600 |
4000 |
4500 |
5500 |
||||||||
Blowing pressure |
kg/cm2 |
20-28 |
20-28 |
20-28 |
18-25 |
18-20 |
18-20 |
18-20 |
18-20 |
||||||||
High pressure consumption |
L/min |
2200 |
2900 |
3550 |
4500 |
4750 |
5800 |
6600 |
7200 |
||||||||
CHILLED WATER |
Operating pressure |
kg/cm2 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
|||||||
Temperature range |
°C |
5-15 |
5-15 |
5-15 |
5-15 |
5-15 |
5-15 |
5-15 |
5-15 |
||||||||
Consumption |
kcal/hr |
18000 |
1800 |
31500 |
32000 |
35000 |
42000 |
52500 |
57500 |
||||||||
Flow rate |
L/min |
120 |
120 |
180 |
160 |
200 |
240 |
300 |
400 |
||||||||
COOLING WATER |
Operating pressure |
kg/cm2 |
3 |
3 |
3 |
3 |
3 |
3 |
2 |
3 |
|||||||
Temperature range |
°C |
20-30 |
20-30 |
20-30 |
20-30 |
20-30 |
20-30 |
20-30 |
20-30 |
||||||||
Consumption |
kcal/hr |
30000 |
30000 |
26250 |
36000 |
35000 |
47250 |
52500 |
57500 |
||||||||
Flow rate |
L/min |
150 |
150 |
150 |
180 |
200 |
270 |
300 |
400 |
||||||||
MACHINE |
Size(L*W*H) |
meter |
8000 * 4700 * 3600 |
8000 * 4700 * 3600 |
8100 * 4300 * 3600 |
10480 * 5300 * 3800 |
11300 * 5500 * 3850 |
12960 * 5500 * 3850 |
10600 * 5600 * 3950 |
11600 * 5600 * 3950 |
|||||||
Weight |
kg |
6500 |
8500 |
13500 |
16000 |
18500 |
20000 |
22000 |
23000 |
SIV series fully automatic pp infusion bottle Blowing Machine is a high performance linear line type bottle blowing machine which is newly developed according to IV solution industry requirement. It can meet different requirement of different size (100-1000ml), with capacity range from 2000 bottle/hour to 20000 bottle/hour. This machine has the feature of automatic, humanized and intelligent with stable performance and quick and simple maintenance. It has the characteristics of high production efficiency, more energy saving and low production cost, etc.
1. Compact integrated design of wash-fill-seal with smaller production area
2. Applicable to any round or flat IV solution bottles with different shapes
3. Voice alarm when fault, and machine halt
4. PLV control, all operation data can be set, changed and kept on file
5. CIP/SIP on line
6. Servo drive and stable during high-speed movement, the positioning is accurate, durable, and the maintenance cost is low.
7. The cam clamping fingers without plastic scrap and powder to ensure product quality.
8. High production capacity: range from 4000-25000bottles per hour.
9. Closed integral chain structure, precise center distance, rings and other foreign objects cannot enter the chain, easy maintenance.
10. The sealing does not air leak, improve the blowing efficiency, shorten the bottle forming time.
1. Controlled by PLC.
2. Frequency variable speeds.
3. Plastic Bottle Forming, Filling and Sealing 3 in 1
4. Meet GMP.
As a professional PP infusion bottle blowing machine manufacturer, Tepai provides high quality PP Infusion Bottle Blowing Machine and PET Beverage/ Water Bottle Blowing Machine with low cost price, welcome to contact us for detailed information!
Blow-Fill-Seal Technique
The Blow Fill Seal Technique has been developed so that formation of the container, filling and sealing takes place in a single machine under a controlled environment that enables the packaging of a pharmaceutical liquid in an aseptic manner.
The following picture show the major phases in the integrated packaging of parenteral solutions using the AFP system.
High Speed full automatic Blowing Machine Line for PP IV Infusion Bottle
Application: High Speed Blowing Machine Line for PP IV Infusion Bottle
Tags